This tester is used for the determination of the impact energy according to Charpy and for impact tensile tests up to 750 Joules.
Features:
- Stiff two-column frame with low-friction pendulum bearing
- Avoidance of interfering vibrations thanks to stiff construction and hammer construction without supplementary masses
- Screw-down brackets and abutments for the specimen integrated into the frame
- Interchangeable hammer with interchangeable fins (according to EN or ASTM)
- Pendulum capacity, selectable: 750, 600, 450, 300 Joules
- Easy exchange of fin, brackets and abutments
- Analogue display for reading off the used impact energy and the angle used
- Easy to use safety device compliant with accident prevention regulations according to VBG 5
- Suited for indirect tests according to ASTM E 23 and for cold specimens (-40 °C), in particular, owing to fast (<5 sec) test runs
| |
