Puncture Test 

DIN 53142-2

The puncture test measures the energy required to puncture corrugated board. In the puncture test according to DIN 53142-2, the use of a pyramid puncture head causes the material to be loaded in all spatial directions. During this process, combined tensile, compression, flexural and shear forces occur. The result obtained in this test is the energy absorbed in puncturing the material. A materials testing machine is used for this test.
Puncture test on paper to DIN 53142-2

Puncture Test with Zwick

  • The results obtained with materials testing machines generally show significantly less scatter than those from the pendulum impact testers typically employed. The correlation with pendulum impact testers has been assessed in collaboration with the German Institute for Corrugated Cardboard Research and Testing (wfp) at 5% (standard deviation).
  • Other benefits of materials testing machines over pendulum impact testers (DIN 53142-1) include absence of weight changing, no distorting oscillations, no fiddling with retaining collars; electronic recording of force and travel and significantly larger measurement range.
  • Theoretically, materials from papers with a grammage of 80 g/m² right up to heavy-duty corrugated cardboard 17 mm thick and an energy of approx. 40 joules can be tested without retooling.
  • An additional benefit is that the machine pulls the pyramid back through the board with no difficulty after the test. There is no need for a collar as required for a pendulum impact tester.
  • All these factors make the testing machine an easier and safer, and a more reliable option.

Video

Linear puncture test on corrugated board

0:51

Linear puncture test on cardboard

Linear puncture test (LPET) on cardboard to DIN 53142-2, paper industry

Top