Fatigue test on flexible foam

ISO 3385, ASTM D 3574

Fatigue testing machine – fatigue test on soft foam ISO 3385 and ASTM D3574
Fatigue testing machine – fatigue test on soft foam ISO 3385 and ASTM D3574

Purpose of the test

Fatigue tests determine the long-term behavior of foam under constant mechanical load. For example, it represents the load applied to a vehicle seat when a car is being driven.

A fatigue test is described in ISO 3385, ASTM D3574 and in many factory standards. First, the indention hardness and specimen thickness of a cushion when no load is applied is measured. Then a load is applied to the foam tens of thousands of times. This load can be applied under normal climate conditions or under defined humidity and temperature conditions. Following continuous load application and after a holding period, the specimen thickness and compressive stress value are measured again. The results are the hardness and thickness loss.

Standards for This Test

ISO 3385
Daimler DBL 5452
General Motors GMW 15471
General Motors GME 60283 Part 8
Toyota TS M7100G – 4.8
ASTM D 3574 – test I3
BMW QV 52009  Part 2
PSA D 42 1047
Renault n° 1047

Relevant Products

Zwick offers an electromechanical testing machine that permits suitably high rates of loading and can be used for determining both indentation hardness and compression stress value and for repeated loading.
Top