Zwick ProLine Z005 TN, 5 kN, RetroLine testControl II

Refurbished with the latest technology.

Before a testing machine is offered for sale in the Zwick Online Pre-owned Market, it undergoes a thorough refurbishment to ensure that it conforms to Zwick's quality standards. Zwick guarantees that all used test equipment is fully operational and conforms to current testing technology.

Gebrauchte Prüfmaschine Z100/TL, testControl II

Note: The materials testing machine including accessories shown is one of several equipment versions and is not indicative of what will be included in your delivery.

are you interested in this testing machine?

If so, please contact us and we will be happy to prepare a customized quotation for you.

Advantages & features

  • A pre-owned testing machine or instrument comes with up-to-date Zwick testing technology.
  • A pre-owned testing machine offers full service/support reliability, as the warranty is identical to that for new machines. This also applies to other makes of pre-owned testing machine.
  • Zwick guarantees spare-part availability for a minimum of ten years. In case of difficulty, help is available swiftly by hotline or directly on the sport.
  • Pre-owned machines supplied by Zwick are state of the art with regard to measurement and control electronics and testing software. This allows the use of additional sensors, fixtures and other accessories from Zwick's extensive range, enabling new testing requirements to be easily accommodated.
  • The machine is completely refurbished, including replacement of defective items and wear parts.
  • Pre-owned machines are fully tested and calibrated before delivery.
  • The machine is refurbished externally (in many cases repainted).
  • Currrent safety-related requirements are adhered to.

Innovative testControl II Machine Electronics

All of Zwick's materials testing machines are equipped with the powerful testControl II measurement and control electronics, offering the ideal basis for precise, reproducible test results.

  • The electronics are installed vertically on the load frame to prevent liquids and from entering the unit and contact with conductive particles.
  • The high-quality finish protects testControl II from external influences. The components used are highly durable.

Machine Compliance Correction

High-quality drive technology plus online correction of machine compliance enable very high travel-measurement and positioning accuracy. The Zwick Roell testing software automatically determines the optimum curve, ensuring maximum possible accuracy for travel measurement and positioning via the crosshead displacement transducer.

  • Real-time correction via the corrected channel directly in the testControl II electronics, regardless of test speed and duration!
  • Control and positioning directly to the corrected channel.
  • Ideal for tests for which direct-measurement extensometers cannot be used.

Maximum Accuracy

High (24-bit) resolution and A/D converter with 400 kHz sampling rate for maximum measured-value accuracy combined with large measurement range. As an example, even the smallest force changes on the specimen can still be recorded and displayed accurately.

High Data Transmission Rate

Synchronous 500 Hz measured-value acquisition-rate delivers fast measurement with maximum reproducibility (regardless of number of measurement channels). The measured-value acquisition-rate can optionally be increased to 2000 Hz. The high data transmission rate enables fast measurement with maximum reproducibility. This is highly advantageous for high-speed tests, short brittle-fracture events and in tear-growth, adhesion and peel tests.

Powerful Drives

Powerful drives allow cyclic tests to be performed at maximum speed up to nominal load - with no waiting time between tests. AllroundLine and ProLine use maintenance-free AC drives.

Adaptive control

All required control parameters are set automatically, for fast, accurate approach to target positions.

  • Changes in specimen properties during the test are compensated for online.
  • This brings time and cost savings by eliminating the need for expensive, time-consuming pre-testing.
  • Ideal for strain control to ISO 6892-1 Method A (1).

Fast, Adaptive Drive Controller

The high drive control frequency of 1000 Hz delivers fast, precise force and strain control. Benefits include enabling components to be loaded very quickly and accurately with a predetermined force.

Controller Setup

Special controller set-up for testing situations with demanding control requirements. For example, if the force sensor is located on the fixed crosshead in force-controlled tests, the controller can simply be switched in the software.

Flexibility Through Modularity

testControl II has six flexible time-synchronized slots, allowing multiple sensors to be used simultaneously and monitored and safeguarded regardless of use.

  • As an example, an extensometer and a transverse strain extensometer can be used in addition to the load cell.
  • If the testing system is equipped with several load cells or additional sensors, these can all remain plugged in. All sensors which are plugged in will then automatically be protected against overloads.

Time-Synchronous Signal Processing

Time-synchronous acquisition of measured values from all sensors connected to plug-in slots takes place at the fast system-frequency, as does data transmission to Zwick Roell testing software. This ensures high test-result reproducibility regardless of the sensors in use or the test sequence; for example force and travel signal synchronicity is maintained, even with strongly differing test speeds.

Gigabit Ethernet Interface

The Gigabit Ethernet interface (a proven industry standard) for the testing machine computer enables very high data throughput.

Innovative Interfaces

The innovative EtherCat® interface is incorporated as standard. The time-synchronized real-time Ethernet field bus system ensures future-proof integration of sensors and power units.

Strain Rate Control

The AllroundLine drive technology’s excellent constant-velocity characteristics and interaction with the sensor technology and adaptive control make it ideal for demanding strain-rate control (e.g. ISO 6892-1, Method A1).

Eco Mode

testControl II electronics switch automatically to eco-mode when not in use, saving energy.

Ergonomic Remote Control with Display

Tests can be performed entirely via the remote control, independent of the PC. All important information is shown on the display. Machine operation is therefore more ergonomic and effective. The rocker-switch with integrated dial makes positioning fast yet highly accurate.

Technical data

Beschreibung

Wert

Typ

RetroLine tC II für Z005 TN ProLine

Tischmodell

Prüfkraft Fmax

5

kN

Prüfraum

Prüfraumhöhe (ohne Einbauten)

1070

mm

Prüfraumbreite

420

mm

Lastrahmen

Lastrahmenhöhe:

Höhe mit Nivellierelementen

1327

mm

Lastrahmenbreite:

Breite mit Maschinenelektronik

850

mm

Lastrahmentiefe:

Gesamttiefe mit Maschinenelektronik

455

mm

Gewicht:

mit Maschinenelektronik, ca.

110

kg

Anschlussbolzen unten

Ø 20

mm

Umgebungstemperatur

+10 ... +35

°C

Antrieb

Motor

AC-Servomotor

Ansteuerung, Sollwertvorgabe

Digital (Echtzeit Ethernet, EtherCAT®)

Traversengeschwindigkeit vmin ... vmax

0,0005 ... 500

mm/min

Traversen-Rücklaufgeschwindigkeit, max.

500

mm/min

Wegauflösung des Antriebs

0,0232

μm

Positionier-Wiederholgenauigkeit an der Traverse (ohne Richtungsumkehr)

±2,0

µm

Regler

adaptiv

Zykluszeit

1000

Hz

Anschlusswerte des Netzeingangs

Variante

400

W

Netzanschluss

230

V

Phasen

1Ph/N/E

zulässige Netzspannungsschwankung

±10

%

Leistungsaufnahme (Volllast), ca.

800

VA

Netzfrequenz

50/60

Hz

Top