Spring-Loaded Grips

These grips are particularly suitable for tests involving very low forces. Their weight is sufficiently low in relation to the nominal force of the attached load cell as to impose no restrictions on the force measurement range of the load cell. The gripping force is generated by a spring. The spring force can be preset, allowing clamping-sensitive materials always to be tested using the same gripping force.
Spring-loaded grips
04_springs_20N_rot3_FO

Spring-Loaded Grips

Fmax 20 N

  • The specimen grip is equipped with a centering ring for clamping threads or wires
  • The jaws can be tilted and precisely adjusted to the specimen
  • The specimen grips ensure a consistent gripping force
  • Lightweight and well suited for load cells designed for small nominal forces
  • Inserting the specimen is fast and easy

Applications

  • Specimen material:
    Ferrous and non-ferrous metals, paper, plastics, insulating materials, artificial leather
  • Specimen shape:
    Round specimens, strip specimens, flat specimens (foils) with or without reinforced gripping ends (dumbbells)
  • Type of loading:
    Tensile

Technical data

Item no.

313324

Type

8135

Test load, max. (Fmax)

0.02

kN

Height:

Upper specimen grip

52

mm

Lower specimen grip

102

mm

Width without clamping screw

56

mm

Depth:

Without clamping screws

12

mm

With clamping screws

17

mm

Adjustability of the opposing jaw

56

mm

Opening width, max. with jaws

1

mm

Gripping of the specimen

The specimen must be gripped over the entire jaw height.

Weight:

Upper specimen grip

0.06

kg

Lower specimen grip

0.08

kg

Connection

Ø 8

mm

Ambient temperature

-15 to +80

°C

Scope of delivery

2

pieces

Springs spring screw grips

Spring-Loaded Grips

Fmax 50 N

  • The specimen grip is equipped with a centering ring for clamping threads or wires
  • The specimen grips ensure a consistent gripping force
  • Inserting the specimen is fast and easy

Applications

  • Specimen material:
    Ferrous and non-ferrous metals, paper, plastics, insulating materials, artificial leather
  • Specimen shape:
    Round specimens, strip specimens, flat specimens (foils) with or without reinforced gripping ends (dumbbells)
  • Type of loading:
    Tensile

Technical data

Item no.

313324

Type

8135

Test load, max. (Fmax)

0.02

kN

Height:

Upper specimen grip

52

mm

Lower specimen grip

102

mm

Width without clamping screw

56

mm

Depth:

Without clamping screws

12

mm

With clamping screws

17

mm

Adjustability of the opposing jaw

56

mm

Opening width, max. with jaws

1

mm

Gripping of the specimen

The specimen must be gripped over the entire jaw height.

Weight:

Upper specimen grip

0.06

kg

Lower specimen grip

0.08

kg

Connection

Ø 8

mm

Ambient temperature

-15 to +80

°C

Scope of delivery

2

pieces

Top